The MediaMaster® Remote application uses Bluetooth® to communicate with your source unit. This procedure will work on all the models listed below:
- MM105
- MM105-HR
- MM55
- MM55-HR
Ensure that your mobile device's Bluetooth® function is enabled before beginning the pairing process below.
Note: All compatible MediaMaster® source units or connected network remotes will require the latest software update to use the MediaMaster® Remote application, update links can be found at the bottom of this article.
Follow these steps to pair using a MediaMaster® source unit, MMR-40 remote, or MFD via a MMA-1-HTML:
1. Press and hold SETTINGS to access the System Settings: Main Menu.
2. Select Mobile Application.
3. Select Pair Mobile Application.
4. Open the MediaMaster® Remote App on your device.
5. Press Search For Device.
6. Select the source unit device App-JLA MediaMaster.
7. If a Bluetooth pairing request appears, select Pair.
Follow these steps to pair from a MM105-HR or MM55-HR, which has no connected remote:
When powered up, the source unit will automatically enter pairing mode for 60 seconds. During this time, open the MediaMaster® Remote App on your device and follow steps 4 through 7 above to pair.
MediaMaster® MM105 / MM105-HR Software Update/Installation Process
MediaMaster® MM55 / MM55-HR Software Update/Installation Process
MediaMaster® MMR-40 Software Update/Installation Process