Image shows EQ Manual Adjustment Dialog Box
After clicking “OK” to Autoset EQ to Target, Expert Assist will provide the user with an opportunity to make any changes to the result. Once the user is happy with the result, they may press “OK” to continue, or make any changes at this time.
It is important to note, by pressing "OK" the user is accepting that they are happy with the results. This means that if the results are poor, the user has accepted it. It is always the user's responsibility to make sure the results are sufficient.
Expert Assist: Before You Begin
Expert Assist: Setting Up a Target
Expert Assist: Identifying Which Channels to Tune
Expert Assist: Identifying Channels to Leave Unmuted:
Expert Assist: Assigning a Target Response
Expert Assist: Selecting Number of EQ Bands
Expert Assist: Confirming All Microphone(s) Are Connected
Expert Assist: Controlling The Volume
Expert Assist: Autoset EQ to Target
Expert Assist: Making Manual Adjustments for EQ <<< You are Here
Expert Assist: Level Setting Procedure
Expert Assist: Making Manual Adjustments for Level
Expert Assist: Delay Setting Procedure