When using any JL Audio system tuning DSP, the output channels can be reset very easily. In TüN® Software, when connected to a DSP product or in simulation mode, the mute controls can be found in the lower right corner of the interface. The user can right click on any of the individual mute icons to reveal a reset option. The user can choose to either reset only that channel or reset all channels. Resetting all channels will only apply to the active preset and the selected device. If there are multiple devices, the user can repeat the process on those devices.
Individual output mute for channel A
Right Click on Channel A reveals this menu
Expert Assist: Before You Begin
Expert Assist: Setting Up a Target
Expert Assist: Identifying Which Channels to Tune
Expert Assist: Identifying Channels to Leave Unmuted:
Expert Assist: Assigning a Target Response
Expert Assist: Selecting Number of EQ Bands
Expert Assist: Confirming All Microphone(s) Are Connected
Expert Assist: Controlling The Volume
Expert Assist: Autoset EQ to Target
Expert Assist: Making Manual Adjustments for EQ
Expert Assist: Level Setting Procedure
Expert Assist: Making Manual Adjustments for Level
Expert Assist: Delay Setting Procedure
Expert Assist: Process Complete - Final Steps
TüN® 4: Resetting DSP Outputs <<< You are Here