Follow

FiX™: Differences from CleanSweep® CL441dsp

Like its predecessor the CleanSweep® CL441dsp, the FiX™ 82 and FiX™ 86 are OEM integration DSP's that correct any factory equalization, providing a completely flat audio signal. The FiX™ also adds new features and control options when compared to the CleanSweep® CL441dsp, as can be seen in the chart below.

  FiX™ 82 FiX™ 86  CleanSweep®
CL441dsp
CleanSweep®
CL-SSI
Calibration Track Play track before pressing the Calibrate button Play track before pressing the Calibrate button Play track after pressing the Calibrate button N/A
Initiate Calibration Press and hold the Calibrate button for 5 seconds  Press and hold the Calibrate button for 5 seconds Press and release the Calibrate button

N/A

Inputs Eight channels:
1/2, 3/4, 5/6 (not channel specific),
7/8 (sub only)
 Eight channels:
1/2 & 3/4 (Front), 5/6 (Rear), 7/8 (sub)
Four channels:
LF, LR, RL, RR (channel specific) 
A (Front),
B (Rear),
C (Sub)
Band Specific Inputs

1/2 (midrange for best auto turn-on results)
7/8 (sub only) 

 1/2 (midrange for best auto turn-on results) N/A  Input C (sub only)
Channel Summing Up to 4-way system  Up to 3-way system N/A Up to 3-way system
Output Level Adjustments  Automatic   Automatic  N/A Manual
OEM Time Delay Correction Automatic  Automatic  N/A

N/A

Status LED's Two for input status,
Two for calibration status
(all with multi-level reporting)
 Two for input status,
Two for calibration status
(all with multi-level reporting)
Four (4) LED’s, one for each channel  Signal ‘Too Low’, ‘Too High’ and ‘Just Right’
Outputs Analog: 2-channel (RCA)
Digital: Optical S/PDIF (Toslink)  
 Analog: 6-channel (RCA) labeled Front, Rear, Sub Analog: 2-channel (RCA)  N/A
Remote Control  DRC-100 (not included)  DRC-100 (Not Included)
DRC-200 (Not Included)
CL-VOL-ASSY (included) N/A
Remote Control Functions Master volume,
Handsfree optimization,
Input clipping indicator
Master volume, subwoofer control (DRC-200), Handsfree optimization, clipping indicator Master volume,
OEM source/AUX switcher or mute/un-mute
N/A
 Turn On Options Remote, DC Offset, Signal Sense (+12VDC Switched always connected)  Remote, DC Offset, Signal Sense (+12VDC Switched always connected) Remote, Signal Sense (+12VDC Switched always connected) N/A

 

 

Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request