Follow

TwK™: Project Levels

Sometimes you need maximum flexibility and complexity, and sometimes you don’t. To address your particular Project with appropriate complexity, the TüN™ software offers three Project Level choices: Basic, Advanced or Expert. 

Basic: offers a streamlined feature set with common sense safeguards designed for efficient system tuning. It is ideal for first time DSP users and time-sensitive projects. You will have access to the Input Mixer and Router, DRC Setup, Output Polarity, 10-band Graphic Equalizers, High-Pass and Low Pass Filters (12, 24 or 48 dB/octave, Linkwitz-Riley) and Level Trim controls. 

Advanced: offers a full feature set with safeguards to prevent accidental damage to the audio system. This is ideal for experienced DSP users looking to get full advantage of the TwK’s power, while avoiding certain pitfalls that can result in poor performance or speaker damage. You will be able to access all the Basic Level features listed above, plus summing polarity, fully parametric 10-band EQ’s and channel delays. 

Expert: offers the complete feature set with no safeguards. This level is only for expert users who have no need for technical support. Additional crossover filter slopes and alignments are added with the following safeguards and constraints disabled: crossover frequency safety mute, parametric EQ boost limits and automatic summing level. You can easily get very bad sound and/or speaker damage if you are not careful. When in doubt, choose “Advanced”.

  Basic Advanced Expert
Equalizer 10-Band Graphic 10-Band Parametric
with EQ boost limits,
or 10-Band Graphic
10-Band Parametric or
10-Band Graphic
Crossovers Adjustable HPF & LPF 
with safety mute
Adjustable HPF & LPF
with safety mute
Adjustable HPF & LPF
Crossover Slopes 12 dB, 24 dB, 48 dB L-R 12 dB, 24 dB, 48 dB L-R, 18 dB BW & 6 dB 6 dB, 12 dB L-R & BW, 18 dB BW, 24 dB L-R & BW, 36 dB BW, 48 dB L-R & BW
Channel Summing Yes, with automatic
summing level
Yes, with polarity switching and adjustable automatic summing level Yes, with polarity switching and manual summing
level adjustment
Time Delay No Yes Yes
Output Polarity Switches Yes Yes Yes
DRC-200 Assignments Yes Yes
Yes

Changing Project Levels of an existing Project: If you begin a Project at one Project Level and wish to change to a higher Project Level, this can be accomplished with “Project Settings” .

IMPORTANT: ONCE YOU MOVE A PROJECT INTO A HIGHER PROJECT LEVEL, IT CANNOT BE RETURNED TO A LOWER PROJECT LEVEL. IF YOU THINK YOU MIGHT NEED TO GO BACK, CREATE A COPY OF THE PROJECT AND STORE IT IN YOUR PC, BEFORE CHANGING THE PROJECT LEVEL.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request